Dispensing Booths

Kleanzone laminar flow work stations or powder dispensing booths for products sampling and dispensing are designed as open front containment systems with built-in scavenging arrangement that draw powder aerosols away from the operator and the operating environment, protecting products and personnel.

Technical specifications of powder dispensing booths and sampling booths

• Cleanliness - Class 100
• Particle retention - 0.3 micron
• Velocity - 100FPM + 20%
• Illumination - 4 ft. 40w with diffuser
• Noise level - 60-65
• Decibels Standard - FED 209E
• Power supply - 220v Single phase

Technical Specification
Velocity	: 90±10 FPM
Illumination	: 750-800 lumen
Noise Level	: 60-65 decibels
Standard	: ISO-14644-1
Power supply	: 230V AC / 415V AC
Available Types	1.CRCA Powder Coated
	2.Stainless Steel 304

Achieving a minimum 99.97% filtration performance, Kleanzone Dispensing booth/ sampling booths are used particularly where hazardous, toxic or sensitizing powders are handled, typically in pharmaceutical, fine chemical and food industries.

Internally constructed in stain polished stainless steel or CRCA Powder coated booths are available in a range of standard and non standard sizes.

The air recirculation system ensures complete safety for personnel as a conditioned down flow of air passes vertically from the booths ceiling inlet plenum pushing any dust or vapors downwards and any way from the operators breathing zone.

The air is extracted from the booth via low level grills mounted in the rear wall.

The exhaust air volume is taken through an Primary prefilter, and 2nd stage fine filter and finally a 3rd stage HEPA filter prior to re circulation in to the booth.

Designed with flush fitting panels and with no contamination prone crevices all our dispensing booths are also available in non standard sizes and layouts to suit customer requirements.